When attempting to power up their PlayStation 4 system, some customers have reported obtaining error number SU-30746-0. The error notice appears to be trapped on the screen for the majority of impacted customers, and there is no visible method to remove it.
What causes the PlayStation 4 error number SU-30746-0 to appear?
The error is a shortcode that indicates that the system was unable to locate the right update file for the console to be updated. The problem is most likely caused by the fact that the firmware is older than the most recent offline firmware allowed by Sony.
This article will offer you a list of troubleshooting procedures if you are presently trying to address this problem. The approaches listed below are ones that other users have used to remedy the problem in similar situations. Follow the steps in the correct order for the best results. Let’s get this party started!
1. Restarting the PS4 in Safe Mode
Error number SU-30746-0 has been claimed to be repaired by rebooting the PS4 using the Safe Mode menu, according to several users. This will lead you to the toolbar menu, where you may update your firmware to the most recent version.
Here’s how to restart your PS4 using the Safe Mode menu:
- Completely turn on your PS4
- Hold the power button down until you hear a beep; a second beep may follow after 5-8 seconds.
- Release the Power button when you hear the second beep and wait until the console reaches the Safe Mode menu.
- Connect your PS4 DualShock controller to your computer via USB connection and link it with the PS button.
- To restart your console in Safe Mode, choose “Restart PS4” and hit X.
If everything goes as planned, your console will boot up correctly and you will be able to upgrade the firmware version using the toolbar.
If the above process yields the same SU-30746-0 error code, go to the next method below. There will be no unsaved data or application data saved throughout this operation.
Here’s a quick approach to updating console firmware using Safe Mode:
Make sure your PS4 is switched off fully (not in sleep mode).
Download the most recent firmware by going to this page (here). The firmware should then be saved to an external USB disk.
Then, on the next screen, scroll down to option 3 (Update system storage) and select the X button.
If you’re connected to the internet through an Ethernet connection, choose “Update via Internet” from the next menu. Insert the USB stick you used in Step 2 and choose Update from USB if you don’t have an active Ethernet connection.
2. Update the Console in Safe Mode
The majority of customers who encounter the error number SU-30746-0 can activate it in safe mode and upgrade the firmware to the newest version through the internet or USB drive. Wait for the procedure to finish before restarting your computer to determine whether the problem code has been resolved.
Continue to the next step below if the problem code remains.
3. Use Safe Mode to Restore Ps4 Defaults
Let’s try if can repair issue SU-30746-0 by resetting PS4 settings to default if the first two approaches fail. This strategy has been reported to be effective in addressing the problem by a number of people.
Here’s a quick instruction for utilizing Safe Mode to reset PS4 settings to default:
- Completely turn on your PS4. Make certain you’re awake.
- Hold the power button down until you hear a beep; you may hear another beep afterward.
- Release the Power button when you hear the second beep and wait for the PS4 to reach the Safe Mode menu.
- Connect your PS4 DualShock controller to your computer via USB connection and link it with the PS button.
- Use a USB cable to connect your DualShock controller to your PS4.
- Select Restore Defaults from the Safe Mode menu and hit the X button.
- Then, with the joystick, choose “Yes” and click the X button to restore the default settings.
- Check to check whether the error code SU-30746-0 has been erased by restarting your console. If the problem persists, please go to the last step below.
4. Start your PS4 in Safe Mode
If you’ve tried everything else and still haven’t gotten anywhere, your PS4’s status should be returned to default. This procedure will restore the system software, among other things.
Warning. Keep in mind that this procedure will wipe out all of your data, even any cloud backup files that haven’t been saved. So, only utilize this method if you have no other choice.
Two PS4 users have confirmed that this procedure correctly fixes the problem code with the SU-30746-0. Here’s a brief walkthrough on how to start the PS4 in Safe Mode:
Make sure your PS4 isn’t in sleep mode by turning it on entirely
Press and hold the power button until you hear a beep; a second beep may be heard after 5-8 seconds. Release the Power button after the second beep and wait until the console reaches the Safe Mode menu.
Connect your PS4 DualShock controller to your computer via USB connection and link it with the PS button.
Use a USB cable to connect your DualShock controller to your PS4.
Scroll down to Option 7 in the Safe Mode menu. Start the PS4 game (reinstall system software). This choice reinstalls software and resets all software systems to factory defaults.
Finally, select Yes and hit the X button to confirm. Your console should be restarted. There’s no need to hunt for trouble code SU-30746-0 anymore.
Conclusion
If none of the above techniques work, we propose utilizing Restore Repair Tool, which may analyze the repository for corrupted or missing files and replace them. This works in the vast majority of situations where the issue is caused by system corruption. Recovery maximizes the performance of your system.
